Site properties, environmental factors, and crop identify influence soil bacterial communities more than municipal biosolid application.

Reducing the environmental impact of Canadian field crop agriculture, including the reliance on conventional synthesised fertilisers, are key societal targets for establishing long-term sustainable practices. Municipal biosolids (MSB) are an abundant, residual organic material, rich in phosphate, nitrogen and other oligo-nutrients, that could be used in conjunction with conventional fertilisers to decrease their use. Though MBS have previously been shown to be an effective fertiliser substitute for different crops, including corn and soybean, there remain key knowledge gaps concerning the impact of MBS on the resident soil bacterial communities in agro-ecosystems. We hypothesised that the MBS fertiliser amendment would not significantly impact the structure or function of the soil bacterial communities, nor contribute to the spread of human pathogenic bacteria, in corn or soybean agricultural systems. In field experiments, fertiliser regimes for both crops were amended with MBS, and compared to corn and soybean plots with standard fertiliser treatments. We repeated this across four different agricultural sites in Quebec, over 2021 and 2022. We sampled MBS-treated, and untreated soils, and identified the composition of the soil bacterial communities via 16S rRNA metabarcoding. We found no indication that the MBS fertiliser amendment altered the structure of the soil bacterial communities, but rather that the soil type and crop identities were the most significant factors in structuring the bacterial communities. Moreover, there was no evidence that the MBS-treated soils were enriched in potential human bacterial pathogens over the two years of our study. Our analysis indicates that not only can MBS function as substitutes for conventional, synthesised fertilisers, but that they also do not disrupt the structure of the resident soil bacterial communities in the short term. Finally, we suggest that the use of MBS in agro-ecosystems poses no greater concern to the public than existing soil bacterial communities. This highlights the significant role MBS could potentially have in reducing the use of conventional industrial fertilisers and improving agricultural production, without risking environmental contamination.

Biosolids, an important route for transporting poly- and perfluoroalkyl substances from wastewater treatment plants into the environment: A systematic review.

The pervasive presence of poly- and perfluoroalkyl substances (PFAS) in diverse products has led to their introduction into wastewater systems, making wastewater treatment plants (WWTPs) significant PFAS contributors to the environment. Despite WWTPs' efforts to mitigate PFAS impact through physicochemical and biological means, concerns persist regarding PFAS retention in generated biosolids. While numerous review studies have explored the fate of these compounds within WWTPs, no study has critically reviewed their presence, transformation mechanisms, and partitioning within the sludge. Therefore, the current study has been specifically designed to investigate these aspects. Studies show variations in PFAS concentrations across WWTPs, highlighting the importance of aqueous-to-solid partitioning, with sludge from PFOS and PFOA-rich wastewater showing higher concentrations. Research suggests biological mechanisms such as cytochrome P450 monooxygenase, transamine metabolism, and beta-oxidation are involved in PFAS biotransformation, though the effects of precursor changes require further study. Carbon chain length significantly affects PFAS partitioning, with longer chains leading to greater adsorption in sludge. The wastewater's organic and inorganic content is crucial for PFAS adsorption; for instance, higher sludge protein content and divalent cations like calcium and magnesium promote adsorption, while monovalent cations like sodium impede it. In conclusion, these discoveries shed light on the complex interactions among factors affecting PFAS behavior in biosolids. They underscore the necessity for thorough considerations in managing PFAS presence and its impact on environmental systems.

Fertilisation of agricultural soils with municipal biosolids: Glyphosate and aminomethylphosphonic acid inputs to Québec field crop soils.

Municipal biosolids (MBS) are suggested to be abundant, sustainable, inexpensive fertilisers, rich in phosphorus and nitrogen. However, MBS can also contain glyphosate and phosphonates that can degrade to AMPA. Glyphosate-based herbicides (GBH) are used in field crops all over the world. Most glyphosate generally degrades within a few weeks, mainly as aminomethylphosphonic acid (AMPA). AMPA is more persistent than glyphosate, and can accumulate from one crop year to the next. AMPA is phytotoxic even to glyphosate-resistant crops. The aims of this study were to assess whether MBS applications constitute: 1) an additional source of glyphosate and AMPA to agricultural soils with respect to GBH, 2) a significant source of trace metals, and 3) a partial replacement of mineral fertilisation while maintaining similar yields. To this end, four experimental agricultural sites were selected in Québec (Canada). Soil samples (0-20 cm) were collected to estimate the as yet unmeasured contribution of MBS application to glyphosate and AMPA inputs in agricultural soils. MBS applied in 2021 and 2022 had mean concentrations of 0.69 ± 0.53 µg glyphosate/dry g and 6.26 ± 1.93 µg AMPA/dry g. Despite the presence of glyphosate and AMPA in MBS, monitoring of these two compounds in corn and soybean crops over two years showed no significant difference between plots treated with and without MBS applications. For the same site, yields measured at harvest were similar between treatments. MBS application could thus represent a partial alternative to mineral fertilisers for field crops, while limiting the economic and environmental costs associated with their incineration and landfilling. It is also an economic advantage for agricultural producers given the possibility of using fewer mineral fertilisers and therefore reducing the environmental impact of their use.

A LC-MS/MS method for the simultaneous quantification of 17 opioids in biosolids.

The solid product of wastewater treatment plants is commonly used as a fertiliser to increase sustainability and waste reuse. It has undergone extensive treatment to remove high nutrient loads, pathogens and heavy metals but the extensive matrix of household chemicals, pesticides and pharmaceuticals remains, untargeted by most treatment technologies. These compounds, particularly pharmaceuticals, have been detected in biosolids with there being evidence of uptake by plants. With the current opioid pandemic in North America and overprescription, a simple method is required for the extraction of opioids from a solid medium as to ascertain the concentrations the environment is exposed to. A sonication-liquid-liquid extracted method was developed where biosolids were suspended in water and extracted using ethyl acetate before analysis on LC MS/MS. Sodium and potassium chloride were compared along with acidic and alkaline conditions. The optimised method utilised NaCl at a pH of 12 and was validated for 17 opioids, achieving linearity >0.987, 86-113% matrix effect and 0.1-10 µg/kg limits of detection. Upon analysis of biosolids destined for agriculture, 14 opioids were detected across all samples in a concentration range of 1-289 µg/kg.

Heavy metals drive microbial community assembly process in farmland with long-term biosolids application.

Biosolids are considered an alternative to chemical fertilizers due to their rich nutrients. However, long-term biosolids application can lead to heavy metals accumulation, which severely affects soil microbial community compositions. The factors influencing soil microbial community assembly were explored under a 16-year long-term experiment with biosolids applications. Our results indicated that biosolids application significantly increased fungal richness while not for bacterial and arbuscular mycorrhizal (AM) fungal richness. Besides, biosolids application significantly affected soil bacterial, fungal compositions and AM fungal community. Soil microorganisms were clustered into different modules with bacterial and AM fungal communities were affected by both organic matter and heavy metals, while fungal communities were affected by heavy metals (Cr, Ni, and As). The soil bacterial community assembly was dominated by stochastic processes while the fungal and AM fungal community assemblies were mainly driven by deterministic processes. Random forest analysis showed that heavy metals were identified as major drivers (Hg, Cu, Cd, and Zn for bacteria, Pb and Cr for fungi, and As and Ni for AM fungi) of the community assembly process. Overall, our study highlights the significant role of heavy metals in shaping microbial community dynamics and gives a guide for controlling biosolids application.

Occurrence, fate, and remediation for per-and polyfluoroalkyl substances (PFAS) in sewage sludge: A comprehensive review.

Addressing per-and polyfluoroalkyl substances (PFAS) contamination is an urgent environmental concern. While most research has focused on PFAS contamination in water matrices, comparatively little attention has been given to sludge, a significant by-product of wastewater treatment. This critical review presents the latest information on emission sources, global distribution, international regulations, analytical methods, and remediation technologies for PFAS in sludge and biosolids from wastewater treatment plants. PFAS concentrations in sludge matrices are typically in hundreds of ng/g dry weight (dw) in developed countries but are rarely reported in developing and least-developed countries due to the limited analytical capability. In comparison to water samples, efficient extraction and cleaning procedures are crucial for PFAS detection in sludge samples. While regulations on PFAS have mainly focused on soil due to biosolids reuse, only two countries have set limits on PFAS in sludge or biosolids with a maximum of 100 ng/g dw for major PFAS. Biological technologies using microbes and enzymes present in sludge are considered as having high potential for PFAS remediation, as they are eco-friendly, low-cost, and promising. By contrast, physical/chemical methods are either energy-intensive or linked to further challenges with PFAS contamination and disposal. The findings of this review deepen our comprehension of PFAS in sludge and have guided future research recommendations.

Agronomic and phytotoxicity test with biosolids from anaerobic CO-DIGESTION with temperature and micro-organism phase separation, based on sewage sludge, vinasse and poultry manure.

This study deals with energy and agronomic valorisation by anaerobic co-digestion with temperature and microorganism phase separation of sewage sludge, vinasse and poultry manure, with the aim of achieving an integral waste management, obtaining bioenergy and biofertilizer that returns nutrients to the soil in a natural way. The yields obtained were 40 mL H2/gVS and 391 mLCH4/gVS. The resulting effluent showed more than 98 % removal of E. coli and Total Coliforms, as well as total removal of Salmonella. The results obtained in the phytotoxicity tests showed that all the proportions studied had phytostimulant and phytonutrient properties, with 20 % having the highest germination index (GI) with mean values of 145.30 %. Finally, the agronomic trial carried out with strawberry crops (Fragaria sp.) showed that the addition of this biosolid has fertilising properties and can be used as an agronomic amendment, with an increase of 145 % in fresh weight and 102.5 % in dry weight, and fruit production doubled with respect to the control. The ANOVA statistical study corroborated that there were significant differences in crop growth when applying different proportions of biofertilizer in the fertilizer. Therefore, these results show that this technology is promising and would contribute environmentally, socially and economically to the transfer towards a circular economy model.

Reducing biosolids from a membrane bioreactor system: Assessing the effects on carbon and nutrient removal, membrane fouling and greenhouse gas emissions.

This study presents the effects on carbon and nutrient removal, membrane fouling and greenhouse gas (GHG) emissions of an Oxic-Settling-Anaerobic (OSA) - Membrane Bioreactor (MBR) pilot plant fed with real wastewater. The influence of three sludge return internal ratios (IR) was investigated by testing 45, 75 and 100%. The results showed that with the increase of IR, the biological sludge production substantially decreased by 85.8% due to the combination of cell lysis and endogenous metabolism. However, a worsening of ammonia removal efficiencies occurred (from 94.5 % to 84.7 with an IR value of 45 and 100%, respectively) mostly due to the ammonia release caused by cell lysis under anaerobic conditions. The N2O emission factor increased with the rise of IR (namely, from 2.17% to 2.54% of the total influent nitrogen). In addition, a variation of carbon footprint (CF) (0.78, 0.62 and 0.75 kgCO2eq m-3 with 45, 75 and 100% IR, respectively) occurred with IR mainly due to the different energy consumption and carbon oxidation during the three periods. The study's relevance is to address the optimal operating conditions in view of reducing sludge production. In this light, the need to identify a trade-off between the advantages of reducing sludge production and the disadvantages of increasing membrane fouling and GHG emissions must be identified in the future.

Nutrient transport, shear strength and hydraulic characteristics of topsoils amended with mulch, compost and biosolids.

Anthropogenic disturbance of soils can disrupt soil structure, diminish fertility, alter soil chemical properties, and cause erosion. Current remediation practices involve amending degraded urban topsoils lacking in organic matter and nutrition with organic amendments (OA) to enhance vegetative growth. However, the impact of OAs on water quality and structural properties at rates that meet common topsoil organic matter specifications need to be studied and understood. This study tested three commonly available OAs: shredded wood mulch, leaf-based compost, and class A Exceptional Quality stabilized sewage sludge (or biosolids) for nutrient (nitrogen and phosphorus) water quality, soil shear strength, and hydraulic properties, through two greenhouse tub studies. Findings showed that nitrogen losses to leachate were greater in the biosolids amended topsoils compared to leaf-compost, mulch amended topsoils, and control treatments. Steady-state mean total nitrogen (N) concentrations from biosolids treatment exceeded typical highway stormwater concentrations by at least 25 times. Soil total N content combined with the carbon:nitrogen ratio were identified to be the governing properties of N leaching in soils. Study soils, irrespective of the type of amendment, reduced the applied (tap) water phosphorus (P) concentration of ∼0.3 mg-P/L throughout the experiment. Contrary to the effects on N leaching, P was successfully retained by the biosolids amendment, due to the presence of greater active iron contents. A breakthrough mechanism for P was observed in leaf compost amended soil, where the effluent concentrations of P continued to increase with each rainfall application, possibly due to an saturation of soil adsorption sites. The addition of OAs also improved the strength and hydraulic properties of soils. The effective interlocking mechanisms between the soil and OA surfaces could provide soil its required strength and stability, particularly on slopes. OAs also improved soil fertility to promote turf growth. Presence of vegetative root zones can further reinforce the soil and control erosion.

A high-throughput analytical method for complex contaminant mixtures in biosolids.

Biosolids are rich in organic matter and other nutrients that contribute to environmental and agricultural sustainability by improving soil textural and biological properties and enhancing plant growth when applied to agricultural crops. Land application of biosolids encourages resource recovery and circumvents drawbacks associated with landfilling or incineration. However, biosolids contain numerous chemicals at trace levels, and quantitative analysis of such mixtures in this complex matrix is crucial for understanding and managing application risks. There are currently few analytical methods available that are capable of extracting and quantifying a large range of the emerging contaminants found in biosolids. In this study, a simplified, rapid, and robust method of analysis was developed and validated for a high-priority organic contaminant mixture of 44 endocrine disrupting compounds known to occur in biosolids. Analytes consisted of chemicals from many classes with a wide range of physiochemical properties (e.g., log Kow values from -1.4 to 8.9). The biosolids extraction and cleanup protocol was validated for 42 of the targeted compounds. The UPLC-MS2 parameters were validated for all 44 organic contaminants targeted for study. From the two batches of biosolids tested using this analytical method, most of the targeted contaminants (86%) were detected with 100% frequency at concentrations ranging from 0.036 to 10,226 µg/kg dw. Performance results highlighted that internal standards alone could not negate biosolids matrix effects; thus, internal standards and the standard addition method were used for residue quantification. This was the first study to detect and quantify 6PPD-q in biosolids, and the first to quantify lidocaine and 11 other chemicals in biosolids using a single analytical method. This method may be expanded for analysis of additional chemicals in biosolids and comparable matrices.

Comparison of ATR-FTIR and NIR spectroscopy for identification of microplastics in biosolids.

Biosolids are considered a potentially major input of microplastics (MPs) to agricultural soils. Our study aims to identify the polymeric origin of MPs extracted from biosolid samples by comparing their Attenuated Total Reflection (ATR) - Fourier-transform infrared (FTIR) spectra with the corresponding near-infrared (NIR) spectra. The reflectance spectra were preprocessed by Savitzky-Golay (SG), first derivative (FD) and compared with analogous spectra acquired on a set of fifty-two selected commercial plastic (SCP) materials collected from readily available products. According to the results portrayed in radar chart and built from both ATR-FTIR and NIR spectral datasets, the MPs showed high correlations with polymers such as polyethylene (LDPE, HDPE), polyethylene terephthalate (PET), polystyrene (PS), polypropylene (PP) and polyamide (PA), determined in SCP samples. Each unknown MP sample had on average three or more links to several types of SCP, according to the correlation coefficients for each polymer ranging from 0.7 up to 1. The comparison analysis classified the majority of MPs as composed mainly by LDPE/HDPE, according to the top correlation coefficients (r > 0.90). PP and PET were better identified with NIR than ATR-FTIR. In contrast to ATR-FTIR analysis, NIR was unable to identify PS. Based on these results, the primary sources of MPs in the biosolids could be identified as discarded consumer packaging (containers, bags, bottles) and fibers from laundry, disposable glove, and cleaning cloth. SYNOPSIS: Microplastics (MPs) are considered contaminants of emerging concern. This study compares two simple and fast spectroscopy techniques to identify microplastics in the biosolid matrix.

A review of the influence of heat drying, alkaline treatment, and composting on biosolids characteristics and their impacts on nitrogen dynamics in biosolids-amended soils.

Application of biosolids to agricultural land has gained increasing attention due to their rich nutrient content. There are a variety of treatment processes for converting sewage sludge to biosolids. Different treatment processes can change the physicochemical properties of the raw sewage sludge and affect the dynamics of nutrient release in biosolids-amended soils. This paper reviews heat drying, alkaline treatment, and composting as biosolids treatment processes and discusses the effects of these treatments on biosolid nitrogen (N) content and availability. Most N in the biosolids remain in organic forms, regardless of biosolids treatment type but considerable variation exists in the mean values of total N and mineralizable N across different types of biosolids. The highest mean total N content was recorded in heat-dried biosolids (HDB) (4.92%), followed by composted biosolids (CB) (2.25%) and alkaline-treated biosolids (ATB) (2.14%). The mean mineralizable N value was similar between HDB and ATB, with a broader range of mineralizable N in ATB. The lowest N availability was observed in CB. Although many models have been extensively studied for predicting potential N mineralization in soils amended with organic amendments, limited research has attempted to model soil N mineralization following biosolids application. With biosolids being a popular, economical, and eco-friendly alternative to chemical N-fertilizers, understanding biosolids treatment effects on biosolids properties is important for developing a sound biosolids management system. Moreover, modeling N mineralization in biosolids-amended soils is essential for the adoption of sustainable farming practices that maximize the agronomic value of all types of biosolids.

Occurrence, spatiotemporal trends, fate, and treatment technologies for microplastics and organic contaminants in biosolids: A review.

This review provides a comprehensive overview of the occurrence, fate, treatment and multi-criteria analysis of microplastics (MPs) and organic contaminants (OCs) in biosolids. A meta-analysis was complementarily analysed through the literature to map out the occurrence and fate of MPs and 10 different groups of OCs. The data demonstrate that MPs (54.7% occurrence rate) and linear alkylbenzene sulfonate surfactants (44.2% occurrence rate) account for the highest prevalence of contaminants in biosolids. In turn, dioxin, polychlorinated biphenyls (PCBs) and phosphorus flame retardants (PFRs) have the lowest rates (<0.01%). The occurrence of several OCs (e.g., dioxin, per- and polyfluoroalkyl substances, polycyclic aromatic hydrocarbons, pharmaceutical and personal care products, ultraviolet filters, phosphate flame retardants) in Europe appear at higher rates than in Asia and the Americas. However, MP concentrations in biosolids from Australia are reported to be 10 times higher than in America and Europe, which required more measurement data for in-depth analysis. Amongst the OC groups, brominated flame retardants exhibited exceptional sorption to biosolids with partitioning coefficients (log Kd) higher than 4. To remove these contaminants from biosolids, a wide range of technologies have been developed. Our multicriteria analysis shows that anaerobic digestion is the most mature and practical. Thermal treatment is a viable option; however, it still requires additional improvements in infrastructure, legislation, and public acceptance.

A comparison of Tier 1, 2, and 3 methods for quantifying nitrous oxide emissions from soils amended with biosolids.

Municipal biosolids are a nitrogen (N)-rich agricultural fertilizer which may emit nitrous oxide (N2O) after rainfall events. Due to sparse empirical data, there is a lack of biosolids-specific N2O emission factors to determine how land-applied biosolids contribute to the national greenhouse gas inventory. This study estimated N2O emissions from biosolids-amended land in Canada using Tier 1, Tier 2 (Canadian), and Tier 3 (Denitrification and Decomposition model [DNDC]) methodologies recommended by the Intergovernmental Panel on Climate Change (IPCC). Field data was from replicated plots at 8 site-years between 2017 and 2019 in the provinces of Quebec, Nova Scotia and Alberta, Canada, representing three distinct ecozones. Municipal biosolids were the major N source for the crop, applied as mesophilic anaerobically digested biosolids, composted biosolids, or alkaline-stabilized biosolids alone or combined with an equal amount of urea-N fertilizer to meet the crop N requirements. Fluxes of N2O were measured during the growing season with manual chambers and compared to N2O emissions estimated using the IPCC methods. In all site-years, the mean emission of N2O in the growing season was greater with digested biosolids than other biosolids sources or urea fertilizer alone. The emissions of N2O in the growing season were similar with composted or alkaline-stabilized biosolids, and no greater than the unfertilized control. The best estimates of N2O emissions, relative to measured values, were with the Tier 3 > adapted Tier 2 with biosolids-specific correction factors > standard Tier 2 = Tier 1 methods of the IPCC, according to the root mean square error statistic. The Tier 3 IPCC method was the best estimator of N2O emissions in the Canadian ecozones evaluated in this study. These results will be used to improve methods for estimating N2O emissions from agricultural soils amended with biosolids and to generate more accurate GHG inventories.

Quality and risk management frameworks for biosolids: An assessment of current international practice.

Biosolids, a product of wastewater treatment, provide a valuable resource, but to optimize the use of this resource it is necessary to manage risks posed to public health and the environment. Key requirements include identifying contaminant sources and providing barriers to ensure containment and treatment while maintaining the viability and value of biosolids products. Responsibility for managing biosolids is the remit of many stakeholders but primarily it rests with private and public wastewater facilities. The global variabilities in the way biosolids resources are acknowledged, applied, and managed are substantial. For example, some countries are increasing incineration because of their ability to remove contaminants while others have experienced a proportional decrease in incineration dependent on industrial resources or regarding resource recovery costs and needs. Some jurisdictions focus on energy recovery and others on land application. A risk management framework is a tool that may provide a suitable holistic approach to biosolids management. With this focus, current instruments in practice globally to manage biosolids were assessed for the degree to which they have adopted a risk management framework. To form a basis for this assessment a set of criteria was established by concept mapping several internationally recognized standards. Guidelines for a range of developed and developing countries were then assessed against these criteria. That process enabled the identification of which current practices were holistic in terms of applying biosolids risk management principles from production to end-use. Through this process, risk management gaps and vulnerabilities were identified. The results reveal that the incorporation of risk standards into risk management frameworks around the world is variable for the presence of risk criteria and the scale of detail provided. Contaminant concentrations need perspective within the changing risk landscape for stakeholders and the environment while jointly the opportunities and contaminant challenges require solutions that balance risks.

Quantifying the removal of polybrominated diphenyl ethers (PBDEs) in physical, chemical, and biological sludge treatment systems.

Polybrominated diphenyl ethers (PBDE) are priority contaminants historically used as flame retardants. PBDEs are known to occur in wastewater biosolids posing potential concerns with the beneficial land application of the biosolids. This study evaluated the removal of 21 congeners in nine full-scale sludge treatment systems including pelletization (P), alkaline stabilization (AS), and aerobic (AE) and anaerobic (AN) digestion. It is the first study to conduct a mass balance analysis of a broad spectrum of PBDEs during physical, chemical, and biological sludge treatment. The PBDE congener pattern in raw sludge and biosolids samples was consistent with commercial formulations. The fully brominated congener BDE-209 dominated biosolids from all sites with an average concentration of 620 ng/g dry weight (dw), followed by BDE-99 (173 ng/g dw) and BDE-47 (162 ng/g dw). Mass balance analysis on the P and AS processes showed no change in PBDE mass flows with treatment. However, aerobic and anaerobic digestion processes reported significant levels of removal and formation of individual congeners, though the results were not consistent between facilities. One aerobic digestion process (AE2) reported an overall average removal of 48%, whereas the other (AE1) reported very high levels of accumulation of tri- and tetraBDE congeners. Similarly, there were significant variations in PBDE behavior across the five anaerobic digestion plants studied. The plant with the longest solids retention time (SRT) (AN1) reported a moderate removal (50%) of overall PBDE loading and lower congeners, whereas other plants (AN2-AN5) showed significant low (-19%) to high (-166%) levels of formation of lower congeners. The results suggest that reduced SRTs result in formation of lower congeners while extended SRTs can lead to moderate removal of some PBDEs. Conventional sludge treatment result in low to moderate PBDE removal and advanced thermal conversion technologies may be needed to improve the contaminant removal during sludge treatment.

Comprehensive assessment of microplastics in Australian biosolids: Abundance, seasonal variation and potential transport to agroecosystems.

Striving towards a circular economy, the application of treated sewage sludge (biosolids) to land is an opportunity to improve the condition of the soil and add essential nutrients, in turn reducing the need for fertilisers. However, there is an increasing concern about microplastic (MP) contamination of biosolids and their transport to terrestrial ecosystems. In Australia, agriculture is the largest biosolids end-user, however, there is limited understanding of MPs in Australian biosolids. Also, while the method to isolate MPs from biosolid is established, a need to extract and analyse MPs more efficiently is still pressing. In this study, we comprehensively quantified and characterised MPs in 146 biosolids samples collected from thirteen wastewater treatment plants (WWTPs) including different seasons. We have optimised an oxidative-enzymatic purification method to overcome current limitations for MP identification in complex samples and accurately report MPs in biosolids. This method enabled removal of >93 % of dry weight of organic material and greatly facilitated the MPs instrumental analysis. The concentration of MPs (>20 µm) in all biosolids samples ranged from 11 to 150 MPs/g dry weight. Abundance of MPs was affected by seasons with higher abundance of MPs usually found during cold and wet seasons. Despite seasonal variations, polyethylene terephthalate, polyurethane and polymethyl methacrylate were the most abundant polymers. Smaller MPs (20 to 200 µm) comprised >70 % of all detected MPs with a clear negative linear relationship observed between MP size and abundance. Per capita concentration of MPs in biosolids across all studied WWTPs was 0.7 to 21 g MPs per person per year. Therefore, biosolids are an important sink and source of MPs to agroecosystems, emphasising the need to more comprehensively understand the fate, impact and risks associated with MPs on agricultural soils.

Tracing the origins of plastics in biosolids: The role of sewerage pipe materials and trade waste.

Plastics are ubiquitous in virtually every environment on earth. While the specific sources of plastics entering wastewater are not well known, growing evidence suggests sewage sludge (biosolids) can be a sink for plastics. One potential source could be the sewerage pipe materials used to transport sewage between premises and wastewater treatment plants (WWTPs). To evaluate the significance of sewerage piping as a source of biosolids plastics concentrations, we compared the proportion of the total network (by length and surface area) of polyethylene (PE), polyvinylchloride (PVC), and polypropylene (PP) pipes from 10 WWTPs against their biosolids mass concentrations (mg plastic/g biosolid). Among the 10 catchments, the percentage of the network consisting of PP piping ranged from 0 to 1 %, with 0.8-21 % for PE, and 8-73 % for PVC. Biosolids plastics concentrations ranged from 0.09 to 8.62 mg/g (mg plastic/g biosolid) for PP and PE, respectively. For all three plastics, there was no significant Pearson correlation (r < 0.4) between the biosolids concentration (dry weight mg/g) and the proportion of the network material of the sewerage piping as plastic (either length or surface area). A comparison of trade waste entering a subset of 6 WWTP showed the highest biosolid principal components analysis (PCA) associations between loads of plastics (g/day) and automotive wash bays, general manufacturing, hospitals, laboratories, food manufacturing, laundry and dry cleaning, and cooling towers. A stepwise regression analysis indicated pipe length and surface area, as well as automotive wash bays and food manufacturing may be significant. While our data gave mixed results on the attribution of the sources of plastics entering WWTPs, it suggests that sewerage infrastructure and trade waste may play some role. Future studies should investigate the leachability of sewerage infrastructure and contributions from specific trade waste categories to determine their significance in plastics entering WWTPs.

Per- and polyfluoroalkyl substances (PFAS) in Canadian municipal wastewater and biosolids: Recent patterns and time trends 2009 to 2021.

The concentrations of per- and polyfluoroalkyl substances (PFAS) were determined in raw influent, final effluent, and treated biosolids at Canadian wastewater treatment plants (WWTPs) to evaluate the fate of PFAS through liquid and solids trains of typical treatment process types used in Canada and to assess time trends of PFAS in wastewater between 2009 and 2021. Data for 42 PFAS in samples collected from 27 WWTP across Canada were used to assess current concentrations and 48 WWTPs were included in the time trends analysis. Although regulated and phased-out of production by industry since the early 2000s and late 2000s/early2010s, respectively, perfluorooctanesulfonate (PFOS), perfluorooctanoate (PFOA), and other long-chain PFAS continue to be widely detected in Canadian wastewater and biosolids. Short-chain PFAS that are not currently regulated in Canada were also widely detected. In general, elevated concentrations of several PFAS were observed at WWTPs that receive landfill leachate. Except for PFOS, concentrations of long-chain perfluoroalkyl carboxylates (PFCAs) and perfluoroalkane sulfonates (PFSAs) generally decreased over time in influent, effluent, and biosolids, which is attributable to industrial production phase-outs and regulations. Concentrations of PFOS did not decrease over time in wastewater media. This indicates that regulatory action and industrial phase-outs of PFOS are slow to be reflected in wastewater. Concentrations of short-chain PFCAs in wastewater influent and effluent consistently increased between 2009 and 2021, which reflect the use of short-chain PFAS as replacements for phased-out and regulated longer-chained PFAS. Short-chain PFAS were infrequently detected in biosolids. Continued periodic monitoring of PFAS in wastewater matrices in Canada and throughout the world is recommended to track the effectiveness of regulatory actions, particularly activities to address the broad class of PFAS.

Accumulation of microplastics in soil after long-term application of biosolids and atmospheric deposition.

Land-applied biosolids can be a considerable source of microplastics in soils. Previous studies reported microplastics accumulation in soils from biosolid application, however, little is known about the contribution of atmospherically deposited microplastics to agricultural soils. In this study, we quantified and characterized microplastics in soils that have been amended with biosolids over the past 23 years. We also collected atmospheric deposition samples to determine the amount and type of plastics added to soils through atmospheric input over a period of about 2 years. Soil samples were taken from a replicated field trial where biosolids have been applied at rates of 0, 4.8, 6.9, and 9.0 t/ha every second crop. The biosolids were anaerobically digested and dewatered, and were applied by spreading onto the soil surface. Soil and atmospheric samples were extracted for microplastics by Fenton's reaction to remove organic matter followed by flotation in a zinc chloride solution to separate plastic from soil particles. Samples were analyzed for microplastics by optical microscopy and Laser Direct Infrared Imaging Analysis (LDIR). The mean number of microplastics identified from biosolids samples was 12,000 particles/kg dry biosolids. The long-term applications of biosolids to the soil led to mean plastics concentrations of 383, 500, and 361 particles/kg dry soil in the 0-10 cm depth for low, medium, and high biosolids application rates, respectively. These plastic concentrations were not significantly different from each other, but significantly higher than those found in non biosolids-amended soil (117 particles/kg dry soil). The dominant plastic types by number found in biosolids were polyurethane, followed by polyethylene, and polyamide. The most abundant plastics in soil samples were polyurethane, polyethylene terephthalate, polyamide, and polyethylene. Atmospheric deposition contributed to 15 particles/kg dry soil per year and was mainly composed of polyamide fibers. This study shows that long-term application of biosolids led to an accumulation of microplastics in soil, but that atmospheric deposition also contributes a considerable input of microplastics.